-
- Certains services ne sont pas accessibles avec un téléphone intelligent
- Commande rapide
- Inscription / identification
- English
0
article
(0,00$ CAD)
Mon panier - Commande rapide
-
Nos produits
- Basses
- Batteries
- Câbles
- Cuivres & Vents
- Effets & Pédales
- Enregistrement et Studio
-
Guitares
Guitares
- Accessoires de Guitare et de Basse
- Amplificateurs Guitares
- Caisses & Étuis de Guitare
- Cordes
- Courroies de Guitare
- Guitares à Résonateur
- Guitares Acoustiques
- Guitares Classiques
- Guitares de Voyage / Petits formats
- Lampes d'Amplificateurs
- Guitares Électriques
- Pack de Guitare
- Picks
- Pickups de Guitare
- Pièces Guitare
- Supports de Guitare
- Harmonicas / Accordéons / Mélodicas
- Instruments à Cordes
- Microphones
- Percussions
- Pianos & Claviers
-
Pièces & Accessoires
Pièces & Accessoires
- Accessoires d'Harmonica/Melodica/Accordéon
- Accessoires de Batterie
- Accessoires de Cuivre & Vent
- Accessoires de Guitare et de Basse
- Accessoires de Micro
- Accessoires de Piano & Clavier
- Accessoires de Sonorisation
- Accordeurs
- Adaptateur d'alimentation
- Autres Accessoires
- Caisses & Étuis d'Ukulélés
- Caisses & Étuis de Basse
- Caisses & Étuis de Batterie
- Caisses & Étuis de Claviers
- Caisses & Étuis de Guitare
- Caisses & Étuis de Pédale
- Capo
- Cordes
- Courroies de Guitare
- Courroies Ukulele/Mandoline/Banjo
- Housse et Support d'amplificateur
- Lampes d'Amplificateur
- Lutrin et Accessoires
- Métronomes
- Pick
- Pickups de Basse
- Pickups de Guitare
- Pièces de Guitare et de Basse
- Protecteurs Auditifs
- Supports de Guitare
- Supports de Microphone
- Supports et Accessoires d'Instruments à Cordes
- Promotions
- Sonorisations
- Ukulélés
- Vêtements et Objets de collection
- Marques
- Promotions
- Carte-cadeau
- DENIS MUSIQUE – Magasin D’instruments De Musique À Québec>
- Catalogue>
- Pièces & Accessoires>
- Accessoires de Sonorisation>
- ART - SPLITMix4 - Four Channel Passive Splitter / Mixer
ART - SPLITMix4 - Four Channel Passive Splitter / Mixer
Code de produit : SPLITMIX4
*Traduction française à venir*
Overview
The SPLITMix4 is a fully passive hybrid mixer that offers a wide variety of configurations. Mix 4 stereo input channels down to 1 stereo output, split a stereo input signal to distribute 4 stereo output channels, or combine the configurations for a wide range of applications. You can even configure the SPLITMix4 as 4 stereo input channels thru 4 independent level attenuators to 4 stereo output channels.
Independent stereo level controls are provided on each channel. All 1/4-inch connections are stereo TRS (Tip, Ring, Sleeve) and all channel connections have intelligent switching to allow for a wide variety of configurations. Plugging into a mix input channel removes it from the splitter bus, and plugging into a splitter output channel removes it from the mix bus. Stereo or mono operation is determined by the type of 1/4-inch plug and cabling that you use.
The fully passive design of the SPLITMix4 has no active circuitry to add noise or distortion, and virtually any signal level can be handled. The Level attenuators cover a wide range and offer over 90dB of attenuation and channel isolation. The SPLITMix4 is designed primarily as a line level device with medium input and output impedances.
Key Features:
-Four Stereo Input Channels
-Stereo Output
-Independent stereo level controls are provided on each channel
-Passive Design (No Power Supply Required)
-Over 90dB of Attenuation
Overview
The SPLITMix4 is a fully passive hybrid mixer that offers a wide variety of configurations. Mix 4 stereo input channels down to 1 stereo output, split a stereo input signal to distribute 4 stereo output channels, or combine the configurations for a wide range of applications. You can even configure the SPLITMix4 as 4 stereo input channels thru 4 independent level attenuators to 4 stereo output channels.
Independent stereo level controls are provided on each channel. All 1/4-inch connections are stereo TRS (Tip, Ring, Sleeve) and all channel connections have intelligent switching to allow for a wide variety of configurations. Plugging into a mix input channel removes it from the splitter bus, and plugging into a splitter output channel removes it from the mix bus. Stereo or mono operation is determined by the type of 1/4-inch plug and cabling that you use.
The fully passive design of the SPLITMix4 has no active circuitry to add noise or distortion, and virtually any signal level can be handled. The Level attenuators cover a wide range and offer over 90dB of attenuation and channel isolation. The SPLITMix4 is designed primarily as a line level device with medium input and output impedances.
Key Features:
-Four Stereo Input Channels
-Stereo Output
-Independent stereo level controls are provided on each channel
-Passive Design (No Power Supply Required)
-Over 90dB of Attenuation
- Condition : Neuf
- Échelle de prix : 50$ - 99,99$
- Disponibilité : En inventaire