CAD - E100SP - STUDIO PACK - With E100SX, CX2, AS10, VP1, AND CLC25

Are you in need of a complete vocal studio recording package? The CAD Audio E100SP Studio Pack is the perfect solution. This package combines the E100Sx large-diaphragm supercardioid condenser microphone with the CX2 2x2 USB audio interface, an AS10 Acousti-Shield desktop/stand mount acoustic enclosure, a 25' premium XLR cable, and the VP-1 6" pop filter to create a turnkey vocal recording solution well suited for musicians, singers, and podcasters.

CAD E100Sx Large-Diaphragm Supercardioid Condenser Microphone
The CAD E100Sx is a versatile microphone with a large-diaphragm condenser element that can be used to record a wide variety of sources including vocals, percussion, and acoustic instruments. This fourth-generation version of the E100 features a narrow supercardioid pickup pattern that focuses audio capture tightly in front of the mic, helping to reject unwanted background sounds and making it well suited to studio, voice-over, and podcasting applications.

The mic's sensitive 1" nickle-plated diaphragm has been engineered to provide accurate phasing for a full, rich vocal sound with a hint of vintage coloration and extended low-end response. An optional 100 Hz high-pass filter with a 6 dB per octave slope can be engaged to filter out those low frequencies, if you prefer. The E100Sx offers a 10 dB pad switch for use on louder audio sources, allowing the mic to handle up to 136 dB SPL.

The included shockmount offers a low-profile appearance and absorbs vibrations to reduce rumbling noise, helping the sensitive, low-noise capsule to deliver detailed, nuanced recordings. A 48V phantom power source is required to power the condenser microphone element.



CAD CX2 Connect II 2x2 USB Audio Interface
Producers, musicians, and podcasters can record at home or on the go with the CAD CX2 Connect II, a portable 2x2 USB Type-C audio interface that combines quality sound with operational simplicity and a robust all-metal body. The two preamps with combo XLR-1/4" mic/instrument inputs enable you to record either two microphones or a combination of microphone and instrument, perfect for the singer/songwriter or a vocalist with an accompanying instrumentalist.

The CX2 Connect II lets you record at professional 24-bit / 96 kHz resolution. It offers 48V phantom power for use with studio condenser microphones and is fully USB bus-powered—no external power source required. A volume knob controls the level of the left and right 1/4" line outputs. There is also a headphone out with volume knob to monitor yourself while performing. For complete recording freedom, the interface is compatible with almost any recording software on Windows or Mac laptop or desktop computers.




FEATURES :

- 2 preamps with combo XLR-1/4" inputs for recording either microphone or instrument-level audio

- 24-bit / 96 kHz resolution

- USB Type-C connectivity

- Gain knob for each channel

- Instrument/Line switch for optimizing level and impedance of 1/4" signal source

- Mono mode sums channel 1 and channel 2 inputs to record left and right (useful for podcast interviews)

- Stereo mode passes channel 1 to record left and channel 2 to record right (for music tracking or live stereo recording)

- Headphones output with volume knob

-Left and right 1/4" balanced line outputs with volume knob

- +48V phantom power

- USB bus-powered


This value-packed bundle contains one each of the following items:

E100Sx large diaphragm condenser mic
CX2 2x2 USB Audio Interface
AS10 Acoustic Enclosure
VP1 Pop Filter
CLC25 Premium XLR mic cable (25')




SPECS :

CAD E100Sx Large-Diaphragm Supercardioid Condenser Microphone Specs

Microphone
Primary ApplicationsStudio Recording, Podcast
Form FactorLarge Diaphragm Mic / Stand/Boom Mount
Intended Sound SourcesVocals, Speech/Voice Over, Instrument
Sound FieldMono
Capsule1 x Condenser
Diaphragm1" / 25.4 mm (Condenser)
Polar PatternSupercardioid
OrientationSide Address
CircuitrySolid-State
Pad-10 dB
High-Pass Filter100 Hz, 6 dB/Octave
Tone AdjustmentNone
Gain AdjustmentNone
On-Board ControlsHigh-Pass Filter, Pad
Performance
Frequency Range20 Hz to 18 kHz
Maximum SPL136 dB SPL
Impedance150 Ohms
Sensitivity-32 dBV
Equivalent Noise Level9.5 dB A-Weighted
Connectivity
Output Connectors (Analog)1 x XLR 3-Pin Male (on Mic)
Headphone ConnectorNone
Power
Operating Voltage48 V (Phantom Power)
Operating Current Consumption1.6 mA (Phantom Power)
Physical
MountingShockmount (with Included Hardware)
Mounting Thread Size5/8"-27 Female
Included CaseNone
Included FiltersNone
CertificationsRoHS
*as per Manufacturer
DimensionsH: 6.1 x W: 2.9 x L: 5.44" / H: 15.4 x W: 7.37 x L: 13.81 cm (Microphone, with Mount)
Weight1.98 lb / 0.9 kg
Packaging Info
Package Weight2.05 lb
Box Dimensions (LxWxH)7.6 x 5.2 x 4.8"




CAD CX2 Connect II 2x2 USB Audio Interface Specs
Form FactorDesktop
DisplayNone
Channels of I/O2 Inputs / 2 Outputs
Built-In DSPNone
Maximum Sampling Rate96 kHz / 24-Bit
Number of Microphone Preamps2 Preamps
Built-In MicrophoneNone
Input Level Adjustment2 x Knob
Expansion SlotsNone
Signal Processing
Gain/Trim Range50 dB
Connectivity
Analog Audio I/O2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line/Hi-Z Input
2 x 1/4" TRS Balanced/Unbalanced Line Output
1 x 1/4" TRS Headphone Output
Phantom Power48 V, Selectable On/Off
Digital Audio I/ONone
Host Connection / USB1 x USB-C
Host Connection ProtocolUSB 2.0
USB (Non-Host)None
Sync I/ONone
Network I/ONone
MIDI I/ONone
Wireless ConnectivityNone
Performance
Frequency Response20 Hz to 20 Hz
Maximum Input LevelMic:
+8 dBu
Hi-Z:
+11 dBu
Line:
+19 dBu
ImpedanceMic :
3 Kilohms
Hi-Z :
1 Megohm
Line :
20 Kilohms
Dynamic Range118 dBA (A-Weighted)
EIN-110 dBA A-Weighted
Digital Audio
Sample Rates96 kHz
Bit Depths24-Bit
Audio Storage & Playback
Memory Card SlotNone
Compatibility
OS CompatibilitymacOS
Windows
*As of March, 2022: Check with manufacturer for the most up-to-date compatibility
Included SoftwareNone
App CompatibleNo
Power
Power RequirementsUSB Bus Power
Physical
Anti-Theft FeaturesKensington Security Slot
Dimensions7.5 x 6 x 2.1" / 19.1 x 15.2 x 5.3 cm
Weight1.1 lb / 0.5 kg
Packaging Info
Package Weight1.315 lb
Box Dimensions (LxWxH)7.9 x 6.5 x 2.2"