SE ELECTRONICS - SE-SE7 - SMALL DIAPHRAGM CONDENSER MICROPHONE - CARDIOID
Press and move to zoom.
Mouse over image to zoom.

SE ELECTRONICS - SE-SE7 - SMALL DIAPHRAGM CONDENSER MICROPHONE - CARDIOID

Product Code: SE-SE7

The sE7: A compact & classy condenser.


The sE7 is a high-quality back-electret small diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond.
With an optimized acoustic design, discrete class-A circuitry and a transformerless output, it delivers clear, natural sound quality at all frequencies, without suffering from fizzy highs or a lack of low-frequency punch.

The discrete electronics and the switchable attenuation pad ensure a high dynamic range, with high sound pressure level (SPL) handling capability and extremely low-noise components. The switchable low-cut filter helps eliminate rumble or footfall noise, and can also compensate for an excess of bass frequencies caused by the proximity effect. This enables the sE7 to close-mic many instruments including electric guitar speaker cabinets, brass instruments and drums.
Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy all-metal design, robust construction, and high-quality manufacturing standards.



FEATURES :

-HIGH-QUALITY CONDENSER CAPSULE
-THE QUIETEST PENCIL MIC IN ITS CLASS
-SWITCHABLE PRE-ATTENUATION PAD
-SWITCHABLE LOW-CUT FILTER
-ALL-METAL HOUSING WITH GOLD-PLATED XLR CONNECTOR,
PREMIUM FINISH & ACCESSORIES



SPECS :

-Capsule Type: 1/2“ back-electret condenser capsule
-Polar Pattern: Cardioid
-Frequency range: 20 Hz - 20 kHz
-Sensitivity: 19 mV/Pa (-34.5 dBV)
-Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)
-Equivalent noise level: 16 dB(A)
-Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad)
-Signal to Noise Ratio: 78 dB
-Low-cut filter: 80 Hz, 6 dB/Oct, switchable
-Attenuation Pad: 20 dB, switchable
-Powering: 48 Volts according to IEC 61938
-Electrical Impedance: <200 Ohms
-Recommended load impedance: >1k Ohms
-Current consumption: 3.0 mA
-Connectivity: 3-pin male XLR connector
-Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)
-Weight: 128 g (4.52 oz.)
CAD $149.99
  • Condition : New
  • Price range : 100$ - 249,99$
  • Availability: Out of stock

Recently Viewed

PROFILE - 6-45N - Nut 42 x 6 x 8 mm
  • CAD $4.95
DIGIFLEX - XLR Male to Female Cable - 10`
  • CAD $13.99