AUDIO-TECHNICA – Pro35

AUDIO-TECHNICA – Pro35

Pro Series

Clip-On Condenser Mic

 

Designed for sax, toms, brass andpercussion, the PRO 35 excels in high-SPL applications and is ideal foractive stage performances. Its extended frequency response capturessubtle nuances of the performance. The included UniMount® clip permitsaccurate positioning and provides shock resistance while protecting theelement. The microphone’s cardioid polar pattern reduces pickup ofsounds from the sides and rear, improving isolation of the desired soundsource.

ELEMENT	Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN	Cardioid
FREQUENCY RESPONSE	50-15,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY	-45 dB (5.6 mV) re 1V at 1 Pa
IMPEDANCE	250 ohms
MAXIMUM INPUT SOUND LEVEL	145 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	115 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	64 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 2 mA typical
SWITCH	Flat, roll-off
WEIGHT (MICROPHONE)	0.3 oz (8 g)
WEIGHT (POWER MODULE)	2.9 oz (81 g)
DIMENSIONS (MICROPHONE)	0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter
DIMENSIONS (POWER MODULE)	3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter
OUTPUT CONNECTOR (POWER MODULE)	Integral 3-pin XLRM-type
CABLE	6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
ACCESSORIES FURNISHED	AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch
AUDIO-TECHNICA CASE STYLE	M12

Click on the chart to view the larger image

POLAR PATTERN

FREQUENCY RESPONSE